Skip to main content

Noble body block: Design Options

Conditional Options​

Armhole dart position​

Controls the position of the armhole dart

  • Type: Percentage
  • Default: 50%
  • Minimum: 10%
  • Maximum: 90%

The Armhole Dart Position option allows you to move the position of the dart/princess seam.

Shoulder dart curvature​

Controls the curvature of the upper part of the shoulder dart

  • Type: Percentage
  • Default: 0%
  • Minimum: -5%
  • Maximum: 2.5%

The Shoulder Dart Curvature option controls the curvature of the upper part of the shoulder dart.

Shoulder dart position​

Controls the position of the shoulder dart

  • Type: Percentage
  • Default: 50%
  • Minimum: 10%
  • Maximum: 90%

The Shoulder Dart Position option allows you to move the position of the dart/princess seam.

Armhole​

Armhole depth​

Controls the depth of the armhole

  • Type: Percentage
  • Default: 44%
  • Minimum: 38%
  • Maximum: 46%

The armhole depth option controls the depth of the armhole.

Back armhole curvature​

Controls how deep the armhole is scooped out at the back

  • Type: Percentage
  • Default: 63%
  • Minimum: 50%
  • Maximum: 85%

The back armhole curvature option controls how much the armhole is scooped at out the bottom in the back.

Back armhole pitch depth​

Controls how deep the armhole cuts into the back

  • Type: Percentage
  • Default: 35%
  • Minimum: 30%
  • Maximum: 40%

The back armhole pitch depth option controls the vertical position of the armhole pitch point at the back.

Back armhole slant​

Controls the slant of the armhole at the back

  • Type: Degrees
  • Default: 5°
  • Minimum: 1°
  • Maximum: 9°

The back armhole slant slightly rotates the armhole around the back pitch point.

Front armhole curvature​

Controls how deep the armhole is scooped out at the front bottom

  • Type: Percentage
  • Default: 63%
  • Minimum: 50%
  • Maximum: 85%

Controls how deep the armhole is scooped out at the front bottom

Front armhole pitch depth​

Controls how deep the armhole cuts into the front

  • Type: Percentage
  • Default: 29%
  • Minimum: 27%
  • Maximum: 31%

The front armhole pitch depth option controls the vertical position of the armhole pitch point at the front.

Darts​

Controls the height of the back dart​

Back dart height

  • Type: Percentage
  • Default: 46%
  • Minimum: 38%
  • Maximum: 54%

The back dart height option controls the height (length if you will) of the back dart.

Dart position​

Controls whether to split at the shoulder or armhole

  • Type: List
  • Default: shoulder
  • options:
    • shoulder
    • armhole

Controls whether to split at the shoulder or armhole

Upper dart length​

Controls the length of the upper dart

  • Type: Percentage
  • Default: 90%
  • Minimum: 80%
  • Maximum: 95%

The Upper Dart Length controls the length of the upper dart, 100% is all the way to the bust point.

Waist dart length​

Controls the length of the waist dart

  • Type: Percentage
  • Default: 90%
  • Minimum: 75%
  • Maximum: 95%

The waist dart length option controls the length of the waist dart towards the bust.

Waist dart position​

Controls the position of the waist 'dart', moving it to the center (negative) or side (positive)

  • Type: Percentage
  • Default: 0%
  • Minimum: -100%
  • Maximum: 100%

The waist dart position option controls the position of the waist 'dart', moving it to the center (negative) or side (positive).

Fit​

Bust span ease​

Controls the amount of ease along the bust span

  • Type: Percentage
  • Default: 0%
  • Minimum: -5%
  • Maximum: 20%

The bust span ease option controls how much ease is applied to the bust span.

tip

This will not add ease to the garment, but merely influence the bust point.

Chest ease​

Controls the amount of ease at the chest

  • Type: Percentage
  • Default: 11%
  • Minimum: 5%
  • Maximum: 20%

The chest ease option controls the amount of ease at the fullest part of your chest.

Full chest ease reduction​

Allows you to independently reduce the ease around the chest to make it fit tight(er) in that area

  • Type: Percentage
  • Default: 4%
  • Minimum: 0%
  • Maximum: 8%

Allows you to independently reduce the ease around the chest to make it fit tight(er) in that area.

Shoulder to shoulder ease​

Controls the amount of ease along the shoulder to shoulder measurement

  • Type: Percentage
  • Default: -0.5%
  • Minimum: -1%
  • Maximum: 5%

The Shoulder to Shoulder Ease option allows you to add ease between the shoulders.

Waist ease​

Controls the amount of ease at the waist

  • Type: Percentage
  • Default: 5%
  • Minimum: 1%
  • Maximum: 20%

The waist ease option controls the amount of ease at your waist.

Advanced​

Back hem slope​

Constrols the slope of the back hem

  • Type: Degrees
  • Default: 2.5°
  • Minimum: 0°
  • Maximum: 5°

The back hem slope option controls the slope of the hem at the back.

Back neck cutout​

Controls how deep the neck is cutout in the back

  • Type: Percentage
  • Default: 6%
  • Minimum: 3%
  • Maximum: 9%

The back neck cutout option controls how far the neck opening is scooped out at the back.

Front shoulder width​

Controls how much width is added to the shoulder in the front

  • Type: Percentage
  • Default: 95%
  • Minimum: 92%
  • Maximum: 98%

The front shoulder width option controls the width of the shoulders at the front, relative to the back.

High bust width​

Controls the width of the high bust

  • Type: Percentage
  • Default: 86%
  • Minimum: 80%
  • Maximum: 92%

The high bust width option allows you to tweak the high bust width at the front.